PRODUCTS & SERVICES

CHEMICAL DOSING PUMP APPLICATION

Swimming pools

Chemical Dosing Pump is used to maintain the pH value of water, chlorine and water quality in the swimming pools. Chemicals are kept in a separate dosing tank and are injected by the control system.

Textile Industry

Used in the process of chemical dyeing and treatment of the clothes.

Food Industry

To maintain food safety and to mix food components at the desired rate to protect human health.

Water Treatment

To maintain the water quality it is used in heating, cooling, and condensation of water. Dosing is done of biocides and inhibitors in cooling.

Agriculture

To add chemicals in the agricultural field to fight pesticides and insects. They are also used to dose fertilizers and other growth-inhibiting substances in agriculture.

Medicine

To inject the measured amount of the chemicals into the body and to keep the patient in a dizzy state. Alkalis and acids are dosed using the pumps for better pH control.

Power Station

They are used to inject the chemicals into the boiler and the feed water to make up the water pressure in very small quantities.

Building

They help in injecting the inhibitors in the pipe works and the components to prevent degradation or corrosion.

CHEMICAL METERING PUMP APPLICATION

Water Treatment – pH level
Water Treatment – Coagulating/Flocculating Impurities
Water Treatment – Chemicals for Enhancement/Treatment
Oil & Gas – General Fuel Additives
Zinc, Copper, Gold Mining – Ore Processing Applications
Corrosion Inhibitors

ELECTRIC DIAPHRAGM PUMP APPLICATIONS

Used to dewater or water removal in multiple industries
They can produce enough pressure for spraying and washing applications
and are probably utilized for filter press functions.
Used in abrasive slurry, gels, pharma and oil industries
Used as shear sensitive foodstuffs

Kanaga’s VB Series

Features:

Gland less and leakage proof Diaphragm pump
Proven Electronic Pulser Circuitry
Efficient Electromagnetic Solenoid Assembly
Excellent proportional control
Corrosion resistant F.R.P. Housing
Teflon faced Hypalon DIAPHRAGM
Unique Dual Function Valve for anti-siphon Production and Air Relief
Accuracy +/- 3%
20:1 Turn Down Ratio
Suction Lift of 1 Metre
Liquid End Options PP, PVC, SS and Teflon

Standard Accessories

L.D.P.E. Tubing
Spring loaded Injection check valve & Foot valve

Optional Accessories

H.D.P.E. Chemical Storage Tank
F.R.P. Chemical Storage Tanks Low Level Float Switch

Installation & Operation

Fix the pump securely in a safe location away from sunlight, sources of heat and other dangerous environs, allowing for a maximum suction lift of 1 metre only.

Cut the supplied tubing into a 1 metre section and connect one of its ends to the suction of the pump and other to the foot value.

Ensure the suction tubing is held straight within the chemical storage tank.

Connect the rest of the required length of tubing to the discharge side of the pump head.

Connect the NRV in a vertical position in the required injection point

Position the discharge tube above the pump head in a safe direction

Plug in the mains chord of the pump to a single phase 230vAc, 5amp socket.

Wait for the pump to prime into the head.

As soon as the liquid starts to flow out of the tube turn off the pump promptly now connect the fully primed tube into the NRV.

Turn the pump on again and check for leaks in all areas.

Now finally adjust the speed buttons as per your dosing requirement.